How To Keep Water From Pooling On Canopy: All You Need To Know

water pooling on gazebo


Sun’s out, everyone is out. If you want to properly enjoy your outdoors, no matter what area of the world you’re located in, you’ll have to create a little haven for you. Canopies are a popular and practical addition to outdoor spaces such as patios, decks, and gardens. They are cheap, versatile and they provide shade and protection from the elements, allowing you to enjoy your outdoor space no matter what the weather has in stock for you. However,  there can be one – but annoying- problem with canopies: water pooling on top of them. This not only damages the canopy material but also creates an inconvenience for people using the space. In this article, we will discuss some effective methods on how to keep water from pooling on canopies.

Choose the Right Design

The design of a canopy plays a crucial role in preventing water pooling or puddling. A sloping or angled design is ideal, as it allows water to run off easily. Flat canopies, on the other hand, are more prone to water pooling. When choosing a canopy, look for a design that is sloped or angled. This will ensure that water runs off the canopy instead of pooling on top.

Regular Maintenance

Regular maintenance is necessary to prevent water from pooling on canopies. Cleaning the canopy regularly can prevent debris from clogging the drainage system. This will ensure that water can flow off the canopy easily. If the canopy has a built-in drainage system, check it regularly to ensure that it is functioning properly. You can also use a soft brush or broom to sweep off any leaves or debris that may have accumulated on top of the canopy: water and dirt is not a good combo. This will prevent water from pooling in those areas and causing damage and potentially ruining the material or tearing it apart.

Add a Canopy Tilt Kit or a gazebo rain diverter

If you have a flat canopy, adding a tilt kit can help prevent water pooling. A tilt kit is a simple device that allows you to adjust the angle of the canopy. This will ensure that water runs off the canopy instead of pooling on top. Tilt kits are easy to install and can be purchased from most canopy manufacturers; they’re quite widely available. They come with instructions and can be installed by anyone with basic DIY skills. A tilt kit is an affordable and effective way to prevent water pooling on a flat canopy. Add it and leave gravity to do its job.

Anti pooling canopy

If you live in an area where you need a canopy but where it also rains a lot, you might  be willing to invest straight  away in an anti pool canopy. It will be a game changer and you won’t have to think too much about how to keep water from pooling on canopy. They are basically gazebos or canopies that are not flat, hence, water does not stagnate on top.

Use a Water-Resistant Canopy Material

Choosing the right canopy material can also help prevent water pooling. Look for materials that are water-resistant, such as polyester, polyethylene, or acrylic. These materials are designed to repel water and are less likely to let water stagnate. Canopies are  mostly done for sunny conditions, but if you need them to shelter you in rough weather, be extra cautious with the material of the canopy you’re getting. This will ensure that your canopy remains dry and protected even in the harshest weather conditions. And you’ll be able to be covered while sitting and relaxing around a nice fire pit.


Water pooling on a canopy can be a frustrating problem, but it’s definitely nothing that should prevent you from getting one or enjoying it. It’s easy to prevent with few tips and tricks and also easy to get rid of if needed. By following these tips, you can ensure that your canopy remains in good condition and provides the shade and protection you need for many years to come.


Why does water pool on a canopy?

Water can pool on a canopy for a variety of reasons, such as improper installation (make sure you anchor it properly), a lack of pitch or slope, or a damaged or sagging canopy.

How can I prevent water from pooling on tarp?

To prevent water from pooling on your canopy, you can adjust the pitch or slope of the canopy, ensure that it is installed properly, and use supports or braces to reinforce the canopy’s structure.

What materials can I use to create a sloped surface on my canopy?

You can use materials such as PVC piping or lumber to create a sloped surface on your canopy. These materials can be attached to the frame of the canopy and angled to create a slope that allows water to run off, sort of a drainage.

What should I do if water has already pooled on my canopy?

If water has already pooled on your canopy, you can use a broom or a soft-bristled brush to gently push the water off. Avoid using sharp or hard objects, as these can damage the canopy.

Can I use a waterproofing spray ?

While waterproofing spray may help to repel water, it is not an ideal solution for preventing water from puddling on a canopy. It will probably not be effective enough on that type of fabric for such a demanding job.

Leave a Comment